SP Series Submersible Slurry Pump

Features

1. Especially designed for conveying slurry media containing a lot of abrasive particles

2. Double tapered roller bearings lubricated by grease or oil can be used for V-belt drive or direct drive

3. Adjustable exit position

4. Closed impeller with front and back blades, threaded connection with shaft

5. The wear disc is installed on the back of the impeller

6. The performance of flow capacity / head can be adjusted through the transmission (V-belt transmission, inverter, etc.)

7. Large gap to prevent wear

8. The shaft sleeve protects the shaft from contact with the pumped medium (hard material shaft sleeve)

9. The seal of the shaft is achieved by packing seal, special slurry mechanical seal or power seal with auxiliary impeller

Performance

Flow capacity: up to 1500 m3 / h (6000 US gpm)

Total head: up to 65 m (215ft)

Max operating pressure: 15 bar (220 PSI)

Temperature operating range: from -30 to 140 °C (-22 to 284 °F)

Max speed: up to 3600rpm at 60HZ

Designs for greater capacity and pressure are available on request.

Standard Material

Duplex steel, cast iron, stainless steel, chromium alloy, nickel-containing cast iron

Other materials can be provided on request.

Application

Food processing

Water treatment

Beneficiation

Steel

Other